Quote from
Stéphane on 16 April 2017, 11 h 47 min
If you have the V2 of the Minipass (DIY or already mounted) and you notice that the signal is only switched on the left or right side of the module, there is a problem with the earth.
To correct this problem we must connect these two points with a soldered wire as in the image below:
If you have the V2 of the Minipass (DIY or already mounted) and you notice that the signal is only switched on the left or right side of the module, there is a problem with the earth.
To correct this problem we must connect these two points with a soldered wire as in the image below: